Products

An extremely heavy-duty small reel, with a Lever Drag.

Saltist LD combines a compact , lever drag design with the free-spool ability to easily toss live baits and hardware.
Saltist® Lever Drag 2-Speed Conventional Reels Features:
Fast, One Touch gear shift
Six CRBB corrosion resistant ball bearings
Precision stainless steel gears, helical-cut for smooth, powerful winding
Ultimate Tournament carbon drag (UTD)
Offset power handle with round speed knob
Aluminum frame and left sideplate are one solid piece for unmatched strength
Dual system Infinite Anti-Reverse (single speed models)
Precision ratchet Anti-Reverse (two speed models)
Machined aluminum spool

Saltist LD combines a compact , lever drag design with the free-spool ability to easily toss live baits and hardware.
Saltist® Lever Drag 2-Speed Conventional Reels Features:
Fast, One Touch gear shift
Six CRBB corrosion resistant ball bearings
Precision stainless steel gears, helical-cut for smooth, powerful winding
Ultimate Tournament carbon drag (UTD)
Offset power handle with round speed knob
Aluminum frame and left sideplate are one solid piece for unmatched strength
Dual system Infinite Anti-Reverse (single speed models)
Precision ratchet Anti-Reverse (two speed models)
Machined aluminum spool

Saltist LD combines a compact , lever drag design with the free-spool ability to easily toss live baits and hardware.
Saltist® Lever Drag Single Speed Conventional Reels Features:
Six CRBB corrosion resistant ball bearings
Precision stainless steel gears, helical-cut for smooth, powerful winding
Ultimate Tournament carbon drag (UTD)
Offset power handle with round speed knob
Aluminum frame and left sideplate are one solid piece for unmatched strength
Dual system Infinite Anti-Reverse (single speed models)
Precision ratchet Anti-Reverse (two speed models)
Machined aluminum spool

Saltist LD combines a compact , lever drag design with the free-spool ability to easily toss live baits and hardware.
Saltist® Lever Drag Single Speed Conventional Reels Features:
Six CRBB corrosion resistant ball bearings
Precision stainless steel gears, helical-cut for smooth, powerful winding
Ultimate Tournament carbon drag (UTD)
Offset power handle with round speed knob
Aluminum frame and left sideplate are one solid piece for unmatched strength
Dual system Infinite Anti-Reverse (single speed models)
Precision ratchet Anti-Reverse (two speed models)
Machined aluminum spool

•Graphite Frame
•Graphite Sideplate
•Aluminum Spool
•Rod Clamp
•Barrel Handle Grip
•A-RB (Anti-Rust Bearings)
•Clicker
•Counter Balanced Handle (TLD 15 only)
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Graphite Frame
•Graphite Sideplate
•Aluminum Spool
•Rod Clamp
•Barrel Handle Grip
•A-RB (Anti-Rust Bearings)
•Clicker
•Counter Balanced Handle (TLD 15 only)
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Graphite Frame
•Graphite Sideplate
•Aluminum Spool
•Rod Clamp
•Barrel Handle Grip
•A-RB (Anti-Rust Bearings)
•Clicker
•Counter Balanced Handle (TLD 15 only)
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Graphite Frame
•Graphite Sideplate
•Erogonomic Power Handle (2011A & 3011A only )
•Aluminum Spool
•Offset Erogonomic Power Grip (5011 & 5011LRSA only)
•A-RB (Anti-Rust Bearings)
•Clicker
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Graphite Frame
•Graphite Sideplate
•Erogonomic Power Handle (2011A & 3011A only )
•Aluminum Spool
•Offset Erogonomic Power Grip (5011 & 5011LRSA only)
•A-RB (Anti-Rust Bearings)
•Clicker
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Graphite Frame
•Graphite Sideplate
•Erogonomic Power Handle (2011A & 3011A only )
•Aluminum Spool
•Offset Erogonomic Power Grip (5011 & 5011LRSA only)
•A-RB (Anti-Rust Bearings)
•Clicker
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Graphite Frame
•Graphite Sideplate
•Erogonomic Power Handle (2011A & 3011A only )
•Aluminum Spool
•Offset Erogonomic Power Grip (5011 & 5011LRSA only)
•A-RB (Anti-Rust Bearings)
•Clicker
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB (Anti-Rust Bearings)
•Topless Design (8, 10, 12, 16 only)
•Reduced Profile Top Crossbar (20, 30 only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Alternating Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces)
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20 & 30 only)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB (Anti-Rust Bearings)
•Topless Design (8, 10, 12, 16 only)
•Reduced Profile Top Crossbar (20, 30 only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Alternating Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces)
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20 & 30 only)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB (Anti-Rust Bearings)
•Topless Design (8, 10, 12, 16 only)
•Reduced Profile Top Crossbar (20, 30 only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Alternating Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces)
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20 & 30 only)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB (Anti-Rust Bearings)
•Topless Design (8, 10, 12, 16 only)
•Reduced Profile Top Crossbar (20, 30 only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Alternating Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces)
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20 & 30 only)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB (Anti-Rust Bearings)
•Topless Design (8, 10, 12, 16 only)
•Reduced Profile Top Crossbar (20, 30 only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Alternating Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces)
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20 & 30 only)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB (Anti-Rust Bearings)
•Topless Design (8, 10, 12, 16 only)
•Reduced Profile Top Crossbar (20, 30 only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Alternating Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces)
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20 & 30 only)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB (Anti-Rust Bearings)
•Topless Design (8, 10, 12, 16 only)
•Reduced Profile Top Crossbar (20, 30 only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Alternating Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces)
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20 & 30 only)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB Bearings (Anti-Rust Bearings)
•Topless Design (8II, 10II, 12II, 16II only)
•Reduced Profile Top Crossbar (20II, 30II, 50IILRS only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20II, 30II and 50IILRS)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB Bearings (Anti-Rust Bearings)
•Topless Design (8II, 10II, 12II, 16II only)
•Reduced Profile Top Crossbar (20II, 30II, 50IILRS only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20II, 30II and 50IILRS)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB Bearings (Anti-Rust Bearings)
•Topless Design (8II, 10II, 12II, 16II only)
•Reduced Profile Top Crossbar (20II, 30II, 50IILRS only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20II, 30II and 50IILRS)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB Bearings (Anti-Rust Bearings)
•Topless Design (8II, 10II, 12II, 16II only)
•Reduced Profile Top Crossbar (20II, 30II, 50IILRS only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20II, 30II and 50IILRS)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB Bearings (Anti-Rust Bearings)
•Topless Design (8II, 10II, 12II, 16II only)
•Reduced Profile Top Crossbar (20II, 30II, 50IILRS only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20II, 30II and 50IILRS)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB Bearings (Anti-Rust Bearings)
•Topless Design (8II, 10II, 12II, 16II only)
•Reduced Profile Top Crossbar (20II, 30II, 50IILRS only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20II, 30II and 50IILRS)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•A-RB Bearings (Anti-Rust Bearings)
•Topless Design (8II, 10II, 12II, 16II only)
•Reduced Profile Top Crossbar (20II, 30II, 50IILRS only)
•High Speed Gear Ratios
•Oversized Gears for incredible amounts of fish-moving torque)
•Diecast Aluminum Frame
•Oversized Handle Shank
•Twin Pawl Anti-Reverse
•Lightweight Graphite Sideplates with Aluminum Braces
•Ergonomic Power Handle
•Clicker
•Harness Lugs (20II, 30II and 50IILRS)
•Ratcheting Drag Lever
•Metal Series
•Rod Clamp Included
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

TS40 Chunk Fishing Special
This cam will be used when fishing chunk bait in heavy currents. The slow ramp from Warning to 1/2 allows the reel to hold the float in the current. The sudden steep section allows the angler to quickly get enough drag for a solid hookset. Target Strike drag is 15 lbs. This cam will primarily be used in the 40-size reel with 50#-60# line.

Kingfish Special
This is a shallow curve designed for Kingfish. Kingfishing involves light lines and light drag pressures so that the hooks do not rip from the fish's mouth. It is a very gradual curve to give anglers extra adjustability with a target Strike drag of 4 pounds. The range of settings with this curve are from 3-5 pounds at Strike which is optimal for use with 10-20 pound test. There is also a large flat spot after warning to be used to aid the clicker when trolling and to allow the angler to quickly back off of the drag on a running fish without dropping into Freespool.

TS40 80# Bottom Fishing Special
This curve will primarily be used in the Gulf of Mexico when bottom fishing next to heavy structure like oil platforms. When fishing, the angler needs to place a tremendous amount of drag on the fish to move it away from the structure quickly. As soon as the angler moves the fish or turns its head, he will then quickly back off the drag to the Strike position at 1/3-1/2 the breaking strength of the line. From here until he lands the fish, he will fight it with a traditional drag range and not go back into the Full position again, unless the fish begins to run back into the structure. This curves allows a very high Full position setting, but quickly backs off to a safe area at the Strike setting so that the angler does not accidentally back off too much drag. Anglers will primarily use 80# test.

TS40 U.F.S.
This cam will be used when in Hawaii for catching Ulua from shore. The anglers will cast from shore and leave the rod in the rocks. The Warning needs to be light enough that when the fish bites it does not pull the rod from the rocks. Most of this fishing is done at night and the angler can not see the bite. Then there will be a gradual curve to the target drag setting of 7 lbs. This setting is lighter than normal, but due to Shimano's smooth drag, the lighter setting is better. Most anglers set higher, so this avoids some jerking. From Strike to Full the curve should be very steep, to get as much drag as possible. This is done to turn the fish quickly.

TS40 20# D.N.K.
This cam will be used for dink fishing in Florida for sailfish. The angler will typically use 20# test. The low amount of drag at Warning is to barely keep the bait in the outrigger. After the fish hits the angler will use the drag from the 1/2 position to the Strike position to fight the fish. At the end of the fight, or if the angler needs to move the fish they will use the very steep Full position to apply heavy drag>

TS40 30-40# D.N.K.
This cam will be used for dink fishing in North Carolina for marlin. The angler will typically use 30-40# test. The low amount of drag at warning is to barely keep the bait in the outrigger. After the fish hits the angler will use the drag from the 1/2 position to the Strike position to fight the fish.

TS40 Chunk Fishing Special
This cam will be used when fishing chunk bait in heavy currents. The slow ramp from Warning to 1/2 allows the reel to hold the float in the current. The sudden steep section allows the angler to quickly get enough drag for a solid hookset. Target Strike drag is 15 lbs. This cam will primarily be used in the 40-size reel with 50#-60# line.

Chunk Fishing Special
This cam will be used when fishing for Tuna with chunk baits in the Northeastern United States. Chunk fishing typically is performed in heavy currents. The slow ramp from Warning to 1/2 is designed to hold the float and chunk in the current. For small baits/floats in light current the Warning position is optimal. When baits are bigger or currents are stronger, the angler can move up to the 1/4 position to hold the bait in place. The sudden steep section allows the angler to quickly get enough drag for a solid hookset. Optimal Strike drag settings range from 5-7 pounds.

#6 Light Line Special
Similar in concept to the L.L.S. 12# Cam, the L.L.S. 6# curve is optimized for 6# test. It is best suited for 6-10# line. This will primarily be used by world record seeking anglers using extremely light line. When set to 2-3 pounds of drag at Strike, the Warning position will be between 0.15 and 0.25 pounds and remain relatively flat to the 1/2 position. This will allow the angler to safely back off drag pressure on a running fish without falling into Freespool and backlashing.

#12 Light Line Special
This light line cam is optimized for 12# monofilament. It is designed for anglers in tournaments with line limits or bonus point situations for line class. The Warning position provides 1/4 pound of drag and remains relatively flat to the 1/2 position. This is to allow the angler to quickly back off of the drag on a running fish without accidentally dropping into Freespool. While higher drag can be used, the curve is not optimal for that type of fishing, as by raising the preset Strike drag above the target settings will result in a loss of Freespool. Without a light line specific drag curve, anglers who use traditional curves may find that the reel will go into freespool between the Warning and 1/2 positions, which results in a loss of drag.

#20 Sailfish Special
This cam was designed using feedback during initial Torsa field testing at the Master's Tournament in Cancun, Mexico. With input from Master's Tournament anglers Stewart Campbell, Tom Greene and Bill Buckland, we created the S.F.S. 20 cam. Optimized for 20 pound test line, it features a low, gradual area from Warning to the half position that begins at 1/4 pound of drag to allow the angler minimal tension on the line when the fish bites and to allow the angler to quickly back off the drag on a running fish. The steep section from the 1/2 position to the full position allows the target Strike setting of 6 pounds, while providing a Full setting of 10 pounds.

#50 Bottom Fishing Special
This curve will primarily be used in the Gulf of Mexico when bottom fishing next to heavy structure like oil platforms. Typically, when a fish bites, the boat runs away from the structure to set the hook and to move the fish away from the structure to reduce cut offs. The angler places a tremendous amount of drag on the fish to move it away from the structure quickly at the risk of breaking the line. As soon as the angler moves the fish or turns its head, he will then quickly back off the drag to the Strike position at 1/3-1/2 the breaking strength of the line. The flat area just before until just after the Strike position allows the angler to quickly get back to the Strike setting without having to worry if they have gone too far or not far enough. This cam is ideal for 50-80 pound test.

TS40 Long Range Special
This cam comes standard on the Torsa 40. It is an "all-around" curve with many uses. The L.R.S. curve was originally designed for the Tiagra anglers on the Long Range boats out of San Diego. These anglers required high maximum drag capabilities in smaller reels to catch large yellowfin tuna in standup situations. The result is a steep curve to allow the use of heavy lines while maintaining Freespool.

20# Bottom Fishing Special
This curve will be used in wreck or reef fishing situations where the angler is moving large fish away from structure. When fishing, the angler needs to place a tremendous amount of drag on the fish to move it away from the structure quickly. As soon as the angler moves the fish or turns its head, he will then quickly back off the drag to the Strike position at 1/3-1/2 the breaking strength of the line. From here until he lands the fish, he will fight it with a traditional drag range and not go back into the Full position again, unless the fish begins to run back into the structure. This cam allows a very high Full position setting, but quickly backs off to a safe area at the Strike setting so that the fish can be fought.

Long Range Special
This cam comes standard on all sizes of Torsa reels. It is an "all-around" curve with many uses. The L.R.S. curve was originally designed for the Tiagra for anglers on the Long Range boats out of San Diego. These anglers required high maximum drag capabilities in smaller reels to catch large Yellowfin Tuna in standup situations. The result is a steep curve to allow use of heavy lines while maintaining Freespool.

White Marlin Special
This cam will be used to drop back baits to White Marlin in the Mid-Atlantic to North East regions of the United States. The curve, when set at a target Strike drag of 8 pounds will provide 1/4 pound of drag from warning to the 1/2 position. This allows the angler to quickly drop the tension on a running fish while using light line. The fighting area of the curve is from 1/2 to Strike. The section of the curve from Strike to Full is very steep to provide a heavy drag setting of 15 pounds to quickly end the fight on a subdued fish for more successful releases.

•Forged & Machined Aluminum Frame, Spool and Sideplates
•Super Stopper
•Ratcheting Drag Lever
•Ergonomic Power Handle
•Clicker
•Metal Series
•Harness Lugs
•S A-RB (Shielded A-RB Bearings)
•A-RB (Anti-Rust Bearings) Roller Bearing
•Redundant Anti-Reverse System (Oversized Roller Bearings and Spring-loaded Ratchet and Pawl)
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Forged & Machined Aluminum Frame, Spool and Sideplates
•Super Stopper
•Ratcheting Drag Lever
•Ergonomic Power Handle
•Clicker
•Metal Series
•Harness Lugs
•S A-RB (Shielded A-RB Bearings)
•A-RB (Anti-Rust Bearings) Roller Bearing
•Redundant Anti-Reverse System (Oversized Roller Bearings and Spring-loaded Ratchet and Pawl)
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Forged & Machined Aluminum Frame, Spool and Sideplates
•Super Stopper
•Ratcheting Drag Lever
•Ergonomic Power Handle
•Clicker
•Metal Series
•Harness Lugs
•S A-RB (Shielded A-RB Bearings)
•A-RB (Anti-Rust Bearings) Roller Bearing
•Redundant Anti-Reverse System (Oversized Roller Bearings and Spring-loaded Ratchet and Pawl)
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Forged & Machined Aluminum Frame, Spool and Sideplates
•Super Stopper
•Ratcheting Drag Lever
•Ergonomic Power Handle
•Clicker
•Metal Series
•Harness Lugs
•S A-RB (Shielded A-RB Bearings)
•A-RB (Anti-Rust Bearings) Roller Bearing
•Redundant Anti-Reverse System (Oversized Roller Bearings and Spring-loaded Ratchet and Pawl)
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Compact, High Speed, Castable Lever Drag, with High Capacity
•E.I. Surface Treatment for extreme corrosion protection
•2 year warranty with online registration
•One-Piece Cold Forged and Machined Aluminum Frame with E.I.
•Machined Aluminum Handle-Side Sideplate with E.I.
•Cold Forged Machined Aluminum Spool with E.I.
•Lightweight Spool with Greaseless Support Bearings for excellent live-bait castability
•Topless Design
•Oversized Carbon Drag Washers for Ultra-High Drag Pressures
•Waterproof Drag (when engaged)
•Silent Twin-Pawl Anti-Reverse
•Ergonomic Power Handle
•Ratcheting Drag Lever
•Preset Knob with Click
•Clicker
•2-Speed HEG (High Efficiency Gearing)
•S A-RB (Shielded A-RB Ball Bearings)
•Aluminum Rod Clamp
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Compact, High Speed, Castable Lever Drag, with High Capacity
•E.I. Surface Treatment for extreme corrosion protection
•2 year warranty with online registration
•One-Piece Cold Forged and Machined Aluminum Frame with E.I.
•Machined Aluminum Handle-Side Sideplate with E.I.
•Cold Forged Machined Aluminum Spool with E.I.
•Lightweight Spool with Greaseless Support Bearings for excellent live-bait castability
•Topless Design
•Oversized Carbon Drag Washers for Ultra-High Drag Pressures
•Waterproof Drag (when engaged)
•Silent Twin-Pawl Anti-Reverse
•Ergonomic Power Handle
•Ratcheting Drag Lever
•Preset Knob with Click
•Clicker
•2-Speed HEG (High Efficiency Gearing)
•S A-RB (Shielded A-RB Ball Bearings)
•Aluminum Rod Clamp
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Compact, High Speed, Castable Lever Drag, with High Capacity
•E.I. Surface Treatment for extreme corrosion protection
•2 year warranty with online registration
•One-Piece Cold Forged and Machined Aluminum Frame with E.I.
•Machined Aluminum Handle-Side Sideplate with E.I.
•Cold Forged Machined Aluminum Spool with E.I.
•Lightweight Spool with Greaseless Support Bearings for excellent live-bait castability
•Topless Design
•Oversized Carbon Drag Washers for Ultra-High Drag Pressures
•Waterproof Drag (when engaged)
•Silent Twin-Pawl Anti-Reverse
•Ergonomic Power Handle
•Ratcheting Drag Lever
•Preset Knob with Click
•Clicker
•2-Speed HEG (High Efficiency Gearing)
•S A-RB (Shielded A-RB Ball Bearings)
•Aluminum Rod Clamp
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Compact, High Speed, Castable Lever Drag, with High Capacity
•E.I. Surface Treatment for extreme corrosion protection
•2 year warranty with online registration
•One-Piece Cold Forged and Machined Aluminum Frame with E.I.
•Machined Aluminum Handle-Side Sideplate with E.I.
•Cold Forged Machined Aluminum Spool with E.I.
•Lightweight Spool with Greaseless Support Bearings for excellent live-bait castability
•Topless Design
•Oversized Carbon Drag Washers for Ultra-High Drag Pressures
•Waterproof Drag (when engaged)
•Silent Twin-Pawl Anti-Reverse
•Ergonomic Power Handle
•Ratcheting Drag Lever
•Preset Knob with Click
•Clicker
•2-Speed HEG (High Efficiency Gearing)
•S A-RB (Shielded A-RB Ball Bearings)
•Aluminum Rod Clamp
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System (16 only)
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines

•Machined Aluminum Frame
•Machined Aluminum Sideplates
•Cold Forged Aluminum Spool
•Rod Clamp
•Ergonomic Power Handle
•A-RB (Anti-Rust Bearings)
•Twin Disk Drag System
•Clicker
•Metal Series
•Chrome Plated Sideplate Screws
•Ratcheting Drag Lever
•Twin Pawl Anti-Reverse System
•Approved for use in Saltwater
•Rated for use with Mono, Fluorocarbon and PowerPro lines